Zyxel P-871M VDSL2 MODEM, POINT TO POINT SOLUTION DATARATE 80/40MBPS

High Speed VDSL Point-to-Point Solution

ZyXEL P-871M is a VDSL point to point solution. Users could use a pair of P-871Ms to configure one as CO and the other as CPE modem to support VDSL bridge mode. This solution makes higher bandwidth leased-line application and LAN-to-LAN connectivity simple and easy. New revenue is possible with minimum installation time and expense. It proves to be a promising technology and revenue generation tool for service providers.

P-871M could support ultra-high data rate to let ISP deploy many kinds of services in 1.5km long distance connections easy.

• IP-based VDSL2 High-Speed Internet Access
• High Speed Date Rate Up to 80/40Mbps
• Ethernet Distance Extension
• Selectable CO/CPE mode via Hardware Switch

Ultra-high Data Rate Up to 80/40Mbps

With up to 80 Mbps for downstream and 40 Mbps for upstream bandwidths, the P-871M offers higher data transfer rates and provides bigger bandwidth than traditional ADSL gateways.

A bigger bandwidth allows small to medium business users to enjoy quality symmetric and asymmetric applications like video conventions, file exchange services…etc., which was previously unavailable.

Operate Over Existing Copper Wires and Co-exist with POTS/ ISDN Services

VDSL provides much higher bandwidth than other DSL technologies, and thus enables services providers to offer a variety of value-added services ranging from broadband Internet access to bandwidth-consuming video applications over existing telephone wires.

P-871M can be implemented quickly, even if there is only one phone line. You can still keep existing POTS or ISDN services while adding new VDSL services.

Revenue Generation with Minimum Installation Cost

Most of small business users need the simple and quick connectivity with VDSL technology to let them use high speed very easy.

P-871M pair allows service providers to offer point-to-point service, such as building-to-building, office to office connection, or buildings with very small number of subscribers, with easily and require no additional configuration.

Just simply plug and play, users could just use P-871M pair to set one as CO and the other as CPE modem, then it could support VDSL bridge mode very easy to enjoy high speed services.

New revenue could be generated with minimum installation time and expense.

1. VDSL Compliance

• Duplex Method: DMT
• Ethernet over VDSL
• ITU.T G.993.1 VDSL1
• ITU.T G.993.2 VDSL2 (Profile 8a, 12a,)
• Band Plan 997 and 998 support
• Support 3/4 bands and U0 band
• Support Up to 80Mbps downstream and 40Mbps upstream
• Selectable CO or CPE mode

�

2. Network Protocol

• IEEE 802.3 10BaseT Ethernet
• IEEE 802.3u 100BaseTx Ethernet
• IEEE 802.3x Flow control
• IEEE 802.1D transparent bridging
• Flow control in full duplex mode
• Back pressure in half duplex mode

�

3. Management

• CLI command via console
• System control VDSL line rate and status through CO mode
• FW upgrade via console
  
  

Hardware Specification:

• WAN: one RJ45 interface for VDSL (over POTS/ISDN)
• LAN: one10/100 Auto MDI/MDI-X RJ-45 interface
• Power Switch: one Push type button
• External console port: one DB9 interface
• Selectable CO and CPE via Switch button
• Status LEDs indicator

�

Power Requirement

• 9V AC 1000mA
• Power supply:120V/230V/240V

�

Physical Specification:

• Dimensions: 189 (W) x 132 (D) x 40 (H) mm
• Weight: 307g

Environmental Specification:

• Operating Environment
  • Temperature: 0°C ~ 40°C
  • Humidity: 20%~85% RH(non-condensing)

�

• Storage Environment
  • Temperature: -20°C ~60°C
    Humidity: 20%~90% RH(non-condensing)

Certification:

• EMC
  • EN55022 Class B
  • EN61000-3-2: 2000
  • EN61000-3-3: 1995+A1:2001
  • FCC Part 15 (Class B)

�

• Safety
  • CSA 60950-1
  • UL 60950-1
  • EN 60950-1:2001+A11
  • IEC 60950-1:2001

• ดูรายละเอียด & รูปภาพเพิ่มเติม ของสินค้าจากผู้ผลิต

�

• รับประกันสินค้า นาน 2 ปี
• ราคาสินค้า ได้รวมภาษีมูลค่าเพิ่ม 7%